VIAIR Ultra Light Duty Onboard Air System - 105 PSI / 1.53 CFM for Air Horns & Air Lockers

Important Notes:

• Use thread sealant for proper installation. Thread tape is not recommended.
• Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.

Description:

Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, air lockers, and a host of other light duty pneumatic needs. While not intended for tire inflation, this onboard air system provides a reliable air source in a smaller volume, and a cost effective package.

Product Details:

• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 10% @ 100 PSI
• Max. Working Pressure: 105 PSI
• Max. Amp Draw: 13-Amps
• Ingress Protection Rating: IP54

Parts Included:

• 1.0 Gallon VIAIR Air Tank
• 98C VIAIR Air Compressor
• Omega Bracket with Mounting Hardware
• Pressure Switch (85 PSI on, 105 PSI off)
• 40-Amp Relay
• 145 PSI Safety Valve
• T-Fitting: 1/4" (M) x 1/4" (F) x 1/8" (F)
• T-Fitting: 1/4" (M) x 1/4" (F) x 1/4" (F)
• 1/4" Drain Cock
• 1/4" Compression Fitting
• 1/4" Plug (M)
• (2) 1/4" (M) NPT to 1/8" (F) BSP
• 20ft. 16 Gauge Wire with Inline Fuse Holder
• Accessory Airline
• Electrical Connections