VIAIR Continuous Duty Onboard Air System - 200 PSI / 2.24 CFM for up to 37" Tires

Important Notes:

• Use thread sealant for proper installation. Thread tape is not recommended.
• Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.

Description:

VIAIR's Continuous Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 485C CE compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.

Product Details:

• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100% @ 200 PSI
• Max. Working Pressure: 200 PSI
• Max. Air Tank Size: 5.0 Gallon
• Max. Amp Draw: 23-Amps
• Ingress Protection Rating: IP67
• Dimensions: 10.63"L x 4.1"W x 6.44"H
• Net Weight: 11.10 lbs.

Parts Included:

• 2.5 Gallon VIAIR Air Tank (200 PSI)
• 485C Stealth Black VIAIR Compressor w/ Thermal Overload Protector
• Digital Tire Inflation Gun with 180 PSI Gauge
• 30ft. Inside Braided Black Coil Hose with Quick Connects
• 1/4" NPT Quick Connect Stud (F)
• 1/4" NPT Quick Connect Coupler (F)
• Dash Panel Gauge with ON/OFF Switch
• Sealed Pressure Switch
• (165 PSI on, 200 PSI off)
• Reducer 1/8" NPT (F) to 1/4" NPT (M)
• Reducer 3/8" NPT (F) to 1/4" NPT (M)
• 1/4" NPT 250 PSI Safety Valve
• 1/4" NPT Drain Cock
• (3) 1/4" NPT Compression Fittings
• 4" Strip of Grommet Material
• 20ft. 12-Gauge Wire with Inline Fuse Holder
• Electrical Connections
• Accessory Airline